Blog
Bayonet, bell-mouth, or threaded? Learn the three AB cartridge connection types, how Mixpac A/B/C/F maps to them, and how to avoid ordering the wrong interface.
Pick the right static mixer nozzle: mix ratio, viscosity, cartridge size, A/B/C/F interfaces, helical vs square geometry, element count, and a decision flow.
Choosing a static mixing nozzle often starts with a simple question: How many mixing elements do I need? The problem …
Air bubbles inside adhesive cartridges can cause inconsistent dispensing, internal voids, and downstream quality problems. For manufacturers using a glue …
Dispensing thermal interface material (TIM) in EV battery packs requires careful coordination between the material, cartridge, mixer, dispensing equipment, and …
A pneumatic dispensing gun often fails its first restart for a reason outside the gun. The regulator was recorded at …
A dual cartridge epoxy gun can look correct and still be mechanically wrong. A purchasing description such as “400 ml, …
An adhesive dispensing gun should never be the first item selected in a two-component dispensing stack. Start with the cartridge …
An automated adhesive dispensing system does not need an articulated robot to be production-ready. If the part sits in a …
Let's Build Your Next Dispensing Solution Together
Send us your requirements, drawings, or questions. Our engineering team is ready to provide a professional solution and a competitive quote, typically within one business day.