How to specify a desktop dispensing robot: work envelope, repeatability, valve and feed method, programming, utilities and a vendor checklist for adhesive assembly.

Learn how to choose an electronics potting dispensing system: manual vs automated, one-part vs two-part materials, cartridges, static mixers, and guns.

A static mixer part number can look precise while leaving the most important question unanswered: will this mixer seal, keep …

Mixpac MAH/MAHX/MBH/MCH/MCQ nozzles: which cartridges do they fit? Map Mixpac A/B/C/F systems, Nordson EFD cross-fit, and when mixing brands backfires.

Bayonet, bell-mouth, or threaded? Learn the three AB cartridge connection types, how Mixpac A/B/C/F maps to them, and how to avoid ordering the wrong interface.

Pick the right static mixer nozzle: mix ratio, viscosity, cartridge size, A/B/C/F interfaces, helical vs square geometry, element count, and a decision flow.

Choosing a static mixing nozzle often starts with a simple question: How many mixing elements do I need? The problem …

Air bubbles inside adhesive cartridges can cause inconsistent dispensing, internal voids, and downstream quality problems. For manufacturers using a glue …

Dispensing thermal interface material (TIM) in EV battery packs requires careful coordination between the material, cartridge, mixer, dispensing equipment, and …