Adhesive Cartridge Drawing Acceptance: Measure Barrels, Outlets, Pistons, and Datums
Adhesive cartridge dimensional inspection starts with an agreed drawing, not a caliper reading. Confirm the part and revision, identify the specified datums and measurement locations, then measure the barrel, outlet and piston in a defined condition using a suitable method. Record individual results against the drawing limits and an agreed acceptance rule. Two reports can […]
Static Mixer Geometry & Bead Quality: Avoiding Stringing, Streaks & Off-Ratio
Static mixer geometry decides bead quality. Learn what causes stringing, streaks, and off-ratio beads,