Dual-Component Cartridges for Two-Part Adhesives
Our dual-component cartridges are engineered for the precise metering and dispensing of two-part materials, including epoxies, acrylics, polyurethanes, and silicones. Featuring a robust design with perfectly sealed separate chambers, they guarantee accurate ratio control and prevent cross-contamination. As the direct manufacturer, we offer a wide range of volumes and ratios, molded from high-purity polymers (PP, Nylon, PBT) for maximum chemical compatibility and performance.
Dual-Component Cartridge Specifications
A System
Dual-Component Cartridges
(Parameter table: length unit mm, capacity unit ml, pressure unit Mpa)
| Ratio | Part Number | Full Code | Color/Finish | Material | A Chamber ID | A Chamber OD | B Chamber ID | B Chamber OD | Length |
| 1:1 | 03000003 | A-CD50-11-PP-06-STD | White cap | PP | 18.97 | 21.54 | 102.89 | ||
| 03000007 | A-CD50-11-PP-07-STD | Gray cap | PP | 18.97 | 21.54 | 102.89 | |||
| 03000017 | A-CD50-11-PP-03-STD | Shut up | PP | 18.97 | 21.54 | 102.89 | |||
| 03010036 | A-CD50-11-PP-01-STD/SZ | Matte surface | PP | 18.97 | 21.54 | 102.89 | |||
| 03010046 | A-CD50-11-PP-02-STD/SZ | PP | 18.97 | 21.54 | 102.89 | ||||
| 03000012 | A-CD50-11-PBT-01-STD | PBT | 18.97 | 21.54 | 102.89 | ||||
| 03010088 | A-CD50-11-PA-01-STD | Gray cap | PA | 18.97 | 21.54 | 102.89 | |||
| 03010107 | A-CD50-11-PA-02-STD | White cap | PA | 18.97 | 21.54 | 102.89 | |||
| 03010136 | A-CD50-11-PP-01-STD/DB | Matte 20pcs/pack | PP | 18.97 | 21.54 | 102.89 | |||
| 03010169 | A-CD50-11-PP-08-STD | Transparent | PP | 18.97 | 21.54 | 102.89 | |||
| 03010230 | A-CD50-11-PP-02-STD/DB | PP | 18.97 | 21.54 | 102.89 | ||||
| 03010235 | A-CD50-11-PP-02-STD/SZ | PP | 18.97 | 21.54 | 102.89 | ||||
| 03010255 | A-CD50-11-PP-02-STD | PP | 18.97 | 21.54 | 102.89 | ||||
| 03010258 | A-CD50-11-PP-09-STD | PP | 18.97 | 21.54 | 100.54 | ||||
| 2:1 | 03000005 | A-CD50-21-PP-05-STD | White Cap | PP | 22.19 | 24.43 | 15.68 | 18.08 | 101.46 |
| 03000018 | A-CD50-21-PP-03-STD | Closed White Cap | PP | 22.19 | 24.43 | 15.68 | 18.08 | 101.46 | |
| 03010056 | A-CD50-21-PP-02-STD | PP | 22.19 | 24.43 | 15.68 | 18.08 | 101.46 | ||
| 4:1 | 03010306 | A-CD50-41-PP-03-STD | PP | 22.20 | 24.43 | 11.14 | 12.52 | 103.45 |
B System
Dual-Component Cartridges
(Parameter table: length unit mm, capacity unit ml, pressure unit Mpa)
Ratio | Part Number | Full Code | Color/Finish | Material | A Chamber ID | A Chamber OD | B Chamber ID | B Chamber OD | Length |
50ml | 03010098 | B-CD50-11-PA-01-STD | Transparer | PA | 18.96 | 21.28 |
|
| 101.13 |
03010103 | B-CD50-11-PP-02-STD | Red Cap | PP | 18.96 | 21.28 |
|
| 101.13 | |
03010160 | B-CD50-11-PP-03-STD |
| PP | 18.96 | 21.28 |
|
| 101.13 | |
03010232 | B-CD50-11-PBT-01-STD/DB |
| PBT | 18.96 | 21.28 |
|
| 101.13 | |
50ml 2:1 | 03010050 | B-CD50-21-PP-01-STD |
| PP | 22.43 | 24.88 | 15.63 | 17.98 | 100.88 |
50ml | 03010062 | B-CD50-41-PP-01-STD | White | PP | 22.36 | 25.15 | 11.01 | 13.71 | 98.73 |
03010113 | B-CD50-41-PBT-01-STD |
| PBT | 22.36 | 25.15 | 11.01 | 13.71 | 98.73 | |
03010162 | B-CD50-41-PP-02-STD |
| PP | 22.36 | 25.15 | 11.01 | 13.71 | 98.73 | |
100ml | 03000022 | B-CD100-11-PA-01-STD |
| PA | 25.05 | 27.36 |
|
| 123.15 |
03010220 | B-CD100-11-PP-02-STD | Grey | PP | 25.05 | 27.36 |
|
| 123.15 | |
03010221 | B-CD100-11-PP-03-STD |
| PP | 25.05 | 27.36 |
|
| 123.15 |
C System
Dual-Component Cartridges
(Parameter table: length unit mm, capacity unit ml, pressure unit Mpa)
Ratio | Part Number | Full Code | Color/Finish | Material | A Chamber ID | A Chamber OD | B Chamber ID | B Chamber OD | Length |
200ML | 03010068 | C-CD200-11-PP-07-STD | White Seal | PP | 32.42 | 36.45 |
|
| 145.38 |
03010108 | C-CD200-11-PP-01-STD | Green Seal | PP | 32.42 | 36.45 |
|
| 145.38 | |
03010128 | C-CD200-11-PBT-03-STD |
| PBT | 32.42 | 36.45 |
|
| 145.38 | |
03010129 | C-CD200-11-PA-03-STD |
| PA | 32.42 | 36.45 |
|
| 145.38 | |
200ML | 03010119 | C-CD200-21-PP-01-STD |
| PP | 38.70 | 43.69 | 27.38 | 30.65 | 145.38 |
400ML | 03010067 | C-CD400-11-PP-12-STD | Smooth | PP | 39.80 | 44.69 |
|
| 183.07 |
03010075 | C-CD400-11-PP-04-STD | Matt | PP | 39.80 | 44.69 |
|
| 183.07 | |
03010100 | C-CD400-11-PP-02-STD | Green Seal Matt | PP | 39.80 | 44.69 |
|
| 183.07 | |
03010101 | C-CD400-11-PP-08-STD | White Seal Matt | PP | 39.80 | 44.69 |
|
| 183.07 | |
03010106 | C-CD400-11-PP-07-STD |
| PP | 44.69 |
|
| 183.07 | ||
03010109 | C-CD400-11-PA-03-STD |
| PA | 39.80 | 44.69 |
|
| 183.07 | |
03010110 | C-CD400-11-PBT-03-STD |
| PBT | 45.59 | 44.69 |
|
|
| |
03010138 | C-CD400-11-PP-13-STD | Clear Tubes | PP | 45.59 | 44.69 |
|
| 183.07 | |
400ML | 03010032 | C-CD400-21-PP-11-STD | White Seal | PP | 45.59 | 52.44 | 32.68 | 37.26 | 183.07 |
03010102 | C-CD400-21-PP-13-STD | Green Seal | PP | 45.59 | 52.44 | 32.68 | 37.26 | 183.07 | |
03010118 | C-CD400-21-PBT-03-STD |
| PBT | 45.59 | 52.44 | 32.68 | 37.26 | 183.07 | |
400ML 4:1 | 03010134 | C-CD400-41-PP-02-STD |
| PP | 51.91 | 57.35 | 25.81 | 28.95 | 183.07 |
03010127 | C-CD400-41-PBT-03-STD |
| PBT | 51.91 | 57.35 | 25.81 | 28.95 | 183.07 | |
03010126 | C-CD400-41-PA-03-STD |
| PA | 51.91 | 57.35 | 25.81 | 28.95 | 183.07 | |
400ML 10:1 | 03010150 | C-CD400-101-PBT-01-STD |
| PBT | 60.76 | 66.52 | 19.24 | 23.68 | 183.07 |
450ML 2:1 | 03010148 | C-CD450-21-PP-01-STD |
| PP | 46.10 | 50.20 | 32.60 | 36.80 | 208.00 |
600ML 1:1 | 03010021 | C-CD600-11-PP-03-STD |
| PP | 45.67 | 49.27 |
|
| 216.87 |
03010131 | C-CDZJ600-11-PP-02-STD | White | PP | 45.67 | 49.27 |
|
| 216.87 | |
Ratio | Part Number | Full Code | Material | Chamber ID | Chamber OD | Length | |||
1500ML 1:1 | 03010206 | C-CD1500-11-PP-01-STD | PP | 74.68 | 78.89 | 253.00 | |||
03010028 | C-CD1500-11-PP-02-STD | PP | 74.68 | 78.89 | 253.00 | ||||
F System
Dual-Component Cartridges
(Parameter table: length unit mm, capacity unit ml, pressure unit Mpa)
Ratio | Part Number | Full Code | Material | A Chamber ID | A Chamber OD | B Chamber ID | B Chamber OD | Length |
200ml 1:1 | 03010097 | F-CD200-11-PP-01-STD | PP | 32.42 | 36.54 |
|
|
|
200ml 2:1 | 03010120 | F-CD200-21-PP-01-STD | PP | 38.70 | 43.69 | 27.38 | 30.65 | 145.38 |
200ml 10:1 | 03010038 | F-CD200-101-PP-02-STD | PP | 49.29 | 54.75 | 15.16 | 19.54 | 145.38 |
03010216 | F-CD200-101-PBT-01-STD | PBT | 49.29 | 54.75 | 15.16 | 19.54 | 145.38 | |
400ml 1:1 | 03010086 | F-CD400-11-PP-02-STD | PP | 39.80 | 44.69 |
|
| 183.07 |
03010091 | F-CD400-11-PBT-02-STD | PBT | 39.80 | 44.69 |
|
| 183.07 | |
03010093 | F-CD400-11-PA-02-STD | PA | 39.80 | 44.69 |
|
| 183.07 | |
400ml 2:1 | 03010246 | F-CD400-21-PP-01-STD | PP | 45.59 | 52.44 | 32.68 | 37.26 | 183.07 |
400ml 4:1 | 03010122 | F-CD400-41-PP-02-STD | PP | 51.91 | 57.35 | 25.81 | 28.95 | 183.07 |
03010123 | F-CD400-41-PA-02-STD | PP | 51.91 | 57.35 | 25.81 | 28.95 | 183.07 | |
03010124 | F-CD400-41-PBT-02-STD | PA | 51.91 | 57.35 | 25.81 | 28.95 | 183.07 | |
400ml 10:1 | 03010039 | F-CD400-101-PBT-01-STD | PBT | 60.76 | 66.52 | 19.24 | 23.68 | 183.07 |
03010090 | F-CD400-101-PP-01-STD | PP | 60.76 | 66.52 | 19.24 | 23.68 | 183.07 | |
Ratio | Part Number | Full Code | Material | Chamber ID | Chamber OD | Length | ||
1500ML 1:1 | 03010310 | BS-CD1500-11-PP-01-STD | PP | 74.68 | 78.89 | 253.00 | ||
Engineered for Precision Ratio Control and Reliability
Precise & Consistent Ratio Control
The interconnected pistons and integrally molded outlet are designed to dispense the exact specified ratio of Part A and Part B from the first drop to the last.
Leak-Proof Separated Chambers
Robust construction with a solid central wall completely separates the two components, eliminating the risk of cross-contamination and ensuring material stability.
High-Strength Body for Pressure
Our cartridges are engineered to withstand the high pressures generated during the dispensing of medium to high-viscosity two-part materials without distortion.
Full System Compatibility
Designed with standard outlets to seamlessly connect with all corresponding static mixer systems (A, B, C, F), providing a complete, reliable dispensing solution.
Technical Resources for Engineers
Chemical Compatibility Chart
Direct from Our Factory, Engineered for Quality
- Produced in our 20,000m² ISO 9001 certified facility.
- Molded on 60+ advanced, high-precision injection molding machines.
- Subject to 100% dimensional and functional inspection before shipment.
- Full traceability from raw material batch to finished product.
Ready to Package Your Two-Part System?
Our packaging experts can help you select the right cartridge, ratio, and material for your formulation. Contact us for volume pricing, compatibility testing, and free samples.