Pneumatic Dispensing Gun Guide: Setup, Pressure, and Troubleshooting
A pneumatic dispensing gun often fails its first restart for a reason outside the gun. The regulator was recorded at idle, the mixer changed after approval, or a similar-looking plunger entered the station. Turning up the air may restore flow for one cycle while hiding the actual mismatch. Key Takeaways Separate drive from ratio. Compressed […]
Dual-Cartridge Epoxy Gun Selection Guide: Ratios, Sizes, and Thrust
A dual cartridge epoxy gun can look correct and still be mechanically wrong. A purchasing description such as “400 ml, 2:1” leaves out the cartridge system, flange, barrel spacing, piston faces, retainer, mixer interface, and the evidence behind the tool’s available force. Those missing fields are where most avoidable selection failures begin. Key Takeaways Start […]